manualshive.com logo in svg

Viglen BX130, Руководство пользователя

Поделиться
Скачать
Viglen BX130 Скачать руководство пользователя страница 64

Viglen BX130 – VIG385P User Manual 

63 

Creating the BIOS Upgrade Floppy Diskette 

 

The BIOS upgrade file is a compressed self-extracting archive that contains the files 
you need to upgrade the BIOS. 
 
1.  Copy the BIOS upgrade file to a temporary directory on your hard disk. 
 
2.  Extract the files and then copy them to a bootable floppy disk. 
 
3.  Read the  README.TXT file, which contains the instructions for the BIOS 

upgrade.  

 

Upgrading the BIOS 

 

1.  Boot the computer with the floppy disk in drive A.   
 
One of the files copied will take the form DA8xxxx.bin The “xxxx” represents the 
BIOS version identifier. 
 
2.  At the DOS prompt, enter the  command “AWDFlash filename.bin 

/py/wb/cd/sn/cc/r/f” This will start the flash utility. 

 

3.  When the utility displays the message  upgrade is complete, press any key to 

restart or power off the system. 

 
4.  As the computer boots, check the BIOS identifier (version number) to make sure 

the upgrade was successful. 

 

5. 

To enter the Setup program, press

 Delete

 when you see the message: 

Press Del 

if you want to run SETUP 

 

6.  Load the BIOS setup defaults. 
 
7.  Set the options in the Setup program to the settings  you wrote down before the 

BIOS upgrade.  

 
8.  Turn off the computer and reboot.  
 

Содержание BX130




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды