13/29
(5)
Click “Scan Once” to search devices that do not appear in the current
project.
(6)
Click “Start Scan & Auto Assign” to search new devices automatically
and add to the current project.
■
Encoders Page
①
ID:
The ID of the current device. (Note: ID is not duplicated.)
②
Name:
The name of the current device.
③
MAC Address:
The MAC Address of the current device.
④
IP Address:
The IP Address of the current device.
⑤
Firmware:
The Firmware version No. of the current device.
⑥
Status:
The status (online or offline) of the current device.
⑦
EDID:
The EDID of the current device.
⑧
L/R Out:
The audio selection of the current device.
⑨
CEC Command:
The CEC Command of the current device.
Operating Instructions:
(1)
Click “Refresh” to refresh the data of the current Encoders.
(2)
Click the drop-down list of EDID to set the current Encoder’s EDID.
(3)
Click the drop-down list of L/R Out to set the current Encoder’s
audio output.
(4)
Click “Command” to set the CEC command for the Encoder.
Содержание VL-IPSC-1
Страница 1: ...VL IPSC 1 AVoIP controller for EB100AT VER 1 0...
Страница 11: ...9 29...
Страница 29: ...27 29...
Страница 30: ...28 29...
