Turn the Control Knob clockwise 1/8 turn or until the fan starts and close the
door. Wait ten minutes and check to see if the humidity level has risen. If it has,
follow instructions above on“Adjusting Humidity Level Upward” until your desired
level is reached.
Check the water level in the reservoir. If it is empty, fill the reservoir as previously
instructed.
Be certain that the fan and airflow port are clear of any obstructions which can
impede air circulation.
Verify that the wick is vertically positioned inside of the reservoir.
Follow the instructions above for “Adjusting Humidity Level Downward”.
Check power source.
Turn the Control Knob clockwise until it stops. The fan should run at this setting.
Turn theControl Knob counter-clockwise until the fan shuts off. If you wish to
adjust the humidity level, follow the instructions for “Adjusting Humidity Level”
above.
Vigilant’s Sentry Humidification Systems are covered by a Two-Year Limited
Warranty on parts and service. Please refer to the enclosed Warranty
Registration Card for details.
Maintenance of Reservoir and Wick Continued....
6.) Insert a clean wick(s) vertically into the reservoir. If your system has a removable
cover, replace it on top of the reservoir.
7.) Fill the reservoir as previously instructed, making sure that you do not overfill.
IMPORTANT DO NOT POUR WATER ON FAN.
Answers to Trouble Shooting Questions
Why is my ClimaCab not to maintaining desired humidity level?
Why is the fan not appearing to work?
What about warranty on the system?
