Vigia NM343, Руководство по установке

Страница: 12 / 47

8
D) BRACKETS FOR STEERING WHEELS
Various rotor mounting kits for steering axles are
available. Do not remove original lug nut form wheel.
Always attach the bracket over the wheel nut with the
provided nut.
2.2 - ROTOR (Fig. 23)
The rotor's purpose is to allow air to pass from a
stationary point on the truck body to the rotating tires.
INSTALLATION PROCEDURE
The rotor must be tightened with moderate torque,
approximately 6 Lb./Ft. (Fig. 24).
Note: The rotor output terminals must be oriented
towards the inflation valves.
2.3 - TIRE VALVES
VIGIA offers different tire valves. All tire valves have a
check valve at their brass end preventing air to escape
from the tire.
a) Hose and Tire valve 50 cm (Fig. 25): for inside tires
in dual-tire configurations.
b) Hose and Tire valve 30 cm : for outside tires in dual-
tire configurations or for single tires.
Fig. 23
Fig. 25
Fig. 24