5
Installation Instructions
Visit the ViewZ USA website at http://www.viewzusa.com
+V
ADJ.
LED
1
2
3
4
5
6
7
8
9
VZ-DC24-320 Power Supply
*Use 18AWG Copper Wire or larger for output power
Wiring
1.
Connect wires from monitor to the terminal blocks (V+) and (V-) using a Phillips screwdriver.
To avoid damaging the monitor, use correct polarity.
2.
Once unit is powered, the amount of output voltage can be adjusted (+V ADJ), if needed for
longer cable runs that have resulted in a voltage drop.
Voltage Adjustment ~24V DC to 27V DC
Clockwise to increase Voltage
Voltage Output (Positive, +)
Voltage Output (Negative, -)
Ground
Line In (Neutral)
Line In (Load)
L
N
-V
+V
+V ADJ.
+V ADJ.
Diagram of Power Supply Connections
