VZ-CMK01
Page 8
Visit the ViewZ website at http://www.viewzusa.com
Installation Instructions
Mounting Hardware (cont’d)
Universal Spacer Installation
Premier Mounts’ Universal Spacers allow you to attach
the mounting bracket to flat panels which have recessed
or uneven mounting points. Each Universal Spacer adds
¼˝ to the distance between the Adapter Plate and your
flat panel.
The Universal Spacers must be stacked and
oriented as shown.
The Universal Spacers must only be installed
between the Adapter Plate and your flat panel.
The Universal Spacers will fit M4, M5, M6 and M8 screw
sizes.
Does your flat panel have:
●
75mm x 75mm VESA mounting points or
100mm x 100mm VESA mounting points?
Proceed to the “Attaching the Flat Panel to
the Mount” section.
●
100mm x 200mm mounting points or 200mm x
200mm mounting points?
Proceed to the “VZ-AP200 Adapter Plate
Installation” section.
VZ-AP200 Adapter Plate Installation
The VZ-AP200 LCD Mount Adapter is used attach flat
panels with 100mm x 200mm and 200mm x 200mm
mounting points to the VZ-CMK01A mount.
Determine which mounting points will be used.
Refer to the “Technical Specifications” section for
VZ-AP200 Adapter Plate mounting points
.
®
Place your monitor face-down on a soft and flat
surface.
¯
Secure the VZ-AP200 Adapter Plate to the back of the
monitor using the following hardware:
•
If you are using the 200mm x 100mm mounting points,
you must use the M4 x 10mm Phillips flat head screws
to secure the VZ-AP200 Adapter Plate to the flat panel.
•
If you are using the 200mm x 200mm mounting
points...
...and you selected M4 screws from the
“Selecting the
Mounting Hardware”
section, you must also use M4
flat washers.
...and you selected M5 screws from the
“Selecting the
Mounting Hardware”
section, you must also use M5
flat washers.
Proceed to the “Attaching the Flat Panel to the
Mount” section.
