Viewtron IP-A4BL Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 84

background image

57

Network Camera User Manual

“rtsp://IP address: rtsp port/profile2?transportmode=mcast”.

Third stream

: The address format is

“rtsp://IP address: rtsp port/profile3?transportmode=mcast”.

Audio

: Having entered the main/sub stream in a VLC player, the video and audio will play

automatically.
If “Allow anonymous login…” is checked, there is no need to enter the username and
password to view the video.
If “auto start” is enabled, the multicast received data should be added into a VLC player to
play the video.

Note

:1. This camera supports local video preview through a VLC player. Enter the RTSP

address (unicast or multicast, eg. rtsp://192.168.226.201:554/profile1?transportmode=mcast)
in a VLC player to realize the simultaneous video preview with the web client.

2. The IP address mentioned above cannot be the address of IPv6.
3. Avoid the use of the same multicast address in the same local network.
4. When playing the video through the multicast streams in a VLC player, please pay

attention to the mode of the VLC player. If it is set to TCP mode, the video cannot be played.

5. If the coding format of the video of the main stream is MJPEG, the video may be

disordered at some resolutions.

4.6.9

RTMP

You can access the third-party (like YouTube) to realize video live view through RTMP
protocol.
Go to Config



Network



RTMP.

Check “Enable”, select stream type, set the reconnection time after timeout and server address
as needed.
Server address: Enter the server address allocated by the third party server.
After that, click “Save” to save the settings. Then click “Refresh” to view the connection
status.

4.6.10

UPNP

If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config



Network



UPnP. Enable UPNP and then enter UPnP name.

«
...
63
64
65
66
67
...
»

Содержание IP-A4BL





















































































Отзывы:

Нет отзывов

Похожие инструкции для IP-A4BL

Бренд: Ultrative Страницы: 9

Бренд: D-tect Systems Страницы: 4

Бренд: Abus Страницы: 16

Бренд: EDELRID Страницы: 52

Бренд: Velleman Страницы: 3

Бренд: e-Watch Страницы: 13

Бренд: Velleman Страницы: 22

Бренд: Speco Страницы: 104

Бренд: Hali-Brite Страницы: 21

Бренд: Takex Страницы: 8

Бренд: QHYCCD Страницы: 27

Бренд: Burg Wächter Страницы: 12

Бренд: COMPRO Страницы: 2

Бренд: Velleman Страницы: 4

Бренд: Hanwha Vision Страницы: 28

Бренд: impact Страницы: 16

Бренд: Foxtech Страницы: 25

Бренд: Sennco Solutions Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды