
49
Network Camera User Manual
Counting Reset
: The current number of the target counting can be reset. You can choose to
reset the counting daily, weekly or monthly. Click “Reset” to manually reset the current
number of crossing line people/car/bike counting.
2.
Check “Trigger FTP” as needed
3.
Set the detection area and blocked area.
Detection Area: 4 detection areas can be set. Targets that enter in the pre-defined detection
area will be counted and captured.
Blocked Area: 4 blocked areas can be set. Targets that enter in the pre-defined blocked area
will not be counted and captured.
You need to set the detection area and blocked area separately.
To set detection area:
Check the checkbox of detection area and select the number and to set the detection area.
Click the “Draw Area” button and then click around the area where you want to set as the
alarm area in the image on the left side (the alarm area should be a closed area). Click the
“Stop Draw” button to stop drawing. Click the “Clear” button to delete the alarm area. Click
the “Save” button to save the settings.
To set blocked area:
Check the checkbox of blocked area and select the number and to set the blocked area. The
setting steps are the same as detection area settings.
Statistics
: If enabled, you can see the statistical information of human, motor vehicle and
non-motor vehicle in the live view interface.
The statistical OSD information can be customized as needed.
4.
Advanced settings. Click the “Advanced” tab to enter the advanced setting interface.
Select the recognition mode as needed. Interval mode and instant mode can be selectable.
Interval mode
: the system will push the captured picture to the live interface according to the
set interval time.
Instant mode
: the system will push the captured picture immediately once a target is
detected.