
28
Network Camera User Manual
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the alarm out.
4.4.3
Alarm In
This function is only available for some models. To set sensor alarm (alarm in):
Go to Config
Alarm
Alarm In interface as shown below.
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options. The setup steps are the same as motion detection. Please refer to
3. Click “Save” button to save the settings.
4. Set the schedule of the sensor alarm. The setup steps of the schedule are the same as the
schedule recording setup. (See
If there are two sensors, please select the sensor ID. Click “Apply settings to” to quickly
apply the settings to the other alarm input.