![background image](http://html.mh-extra.com/html/viewsonic/vpw5500/vpw5500_user-manual_1021435028.webp)
Signal Check
Statu
s
D
is
play
Act
i
on
When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.
A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.
When the sync signal is no longer
detected.
• A guide displays No Sync.
Signal, and Power Save (for
approx. 5 sec.)
• When the condition continues
where the sync signal cannot be
detected, indicator lamp of
orange and the mode switches
to power save mode.
Recheck the personal computer
power switch status and the
connection status.
When the input signal does not
match the monitor specifications
or is in an unstable status.
A guide displays Invalid Scan
Freq.
Recheck the input signal
specifications.
30
32
〜
! No Sync. Signal
OTHER FEATURES (continued)
RGB2
RGB
H : 48.4kHz
V : 60.1 Hz
-- -- Min.
-- -- : -- --
OFF
RGB
! Invalid Scan Freq.
Power Save Mode
When the RGB1, RGB2 input is selected
• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the
computer is not being used to reduce power consumption by this unit.
RGB sync signal
Horizontal
Yes
No
Yes
No
Vertical
Yes
Yes
No
No
PC signal
Active (normal display)
Blank (no display)
Operation mode
On
Off
Indicating lamp
Lights green
Lights orange
Power consumption
365W
3W or less (RGB1)
1W or less (RGB2 ; 100V
≦
AC
≦
120V)
3W or less (RGB2 ; 120V
<
AC
≦
240V)
Returning to operating status
• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB1/RGB2 buttons of the remote control.
ViewSonic
VPW5500
25
Change
s
i
n the
si
gnal
s
tatu
s
are d
is
played on the
s
creen.
power source changes to
Содержание VPW5500
Страница 1: ...User Guide Guide de l utilisateur Guía del usuario VPW5500 PLASMA DISPLAY 55 ...
Страница 36: ...SUPPLEMENT ViewSonic VPW5500 33 ...
Страница 54: ...ViewSonic Corporation ...