ViewSonic SC-T46, Руководство пользователя

Страница: 59 / 132

Configuring Client Settings
Configuring External Device Settings
49
4.3.4 Disabling or Enabling Attached Audio Devices
To disable/enable attached audio devices, please do the following:
NOTE
• If you disable locally attached audio devices, client users are not allowed to perform
audio playback or recording with these devices in an RDP / ICA / View session.
• To perform audio playback or recording with local audio devices in an RDP / ICA /
View session, you need to enable locally attached audio devices here (the
Audio
setting item under
Devices
tab) and configure audio related settings (if any) in the
RDP / ICA / View connection settings. For detailed instructions, please
refer to sections:
— “4.5.5 Configuring Advanced RDP Connection Settings” on page 66
— “4.5.8 Configuring Advanced ICA Connection Settings” on page 94
—
“4.5.11 Configuring Advanced View Connection Settings” on page 109
1. On ViewSonic Client Setup, click
Devices
>
Audio
.
2. Click to check/uncheck Enable System Audio Device .
3. Click Save to confirm your selection.
NOTE
• The change will not take effect until the client has been restarted.