Configuring Client Settings
Configuring System Settings
37
4.2.6 Taking Snapshots for Mass Deployment
A snapshot is the system image of a client, allowing you to use that image for mass deployment. This system image
can be stored on a remote management computer or a locally attached USB flash drive.
NOTE
•
To store the system image on a remote computer, ensure that ViewSonic Device
Manager has been installed on that computer, and that the client has been added
into a managed group under ViewSonic Device Manager.
•
When taking a snapshot, all system specific information, including the Computer
Security Identifier (SID) and computer name, will be reset or removed from the
system image by performing the System Preparation (
Sysprep
) tool automatically.
NOTE
•
Taking a snapshot will reset the startup behavior to the default (auto-login with the
default standard user account). For details, please refer to “About the Behavior of
System Startup” on page 13.
To take a snapshot from a client, please do the following:
1. On ViewSonic Client Setup, click
System
>
Snapshot
.
2. Under the Snapshot section, click the drop-down menu to select where to store the snapshot. Two options
are available:
Network
and
USB
.
•
To store the snapshot file set on the remote computer, please select
Network
.
•
To store the snapshot file set on the locally attached USB flash drive, please select
USB
.
Содержание SC-T46
Страница 1: ...SC T47 Thin Client User Guide Model No VS15835...
Страница 132: ......
