ViewSonic Pro9510L, Руководство пользователя

Страница: 23 / 100

10
Using the remote mouse control
The capability of operating your computer with the remote control gives you more flexibility when delivering
presentations.
1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in
place of your computer’s mouse.
2. Set the input signal to COMPUTER.
3. Press Mouse on the remote control to switch from the normal mode to the mouse mode. An icon
appears on the screen to indicate the activation of the mouse mode.
4. Perform the desired mouse controls on your remote control.

To move the cursor on the screen, press
▲ / ▼ / ◄ / ►/
.

To left-click, press .

To right-click, press .

To operate your display software program (on a connected PC) which responds to page up/down
commands (like Microsoft PowerPoint), press Page Up/Page Down.

To return to the normal mode, press Mouse again or other keys except for the mouse related
multi-function keys.
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the
rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15
degrees above or below the projector level. If the projector does not respond to the remote control, move a
little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are limited in
use.