ViewSonic Pro9510L, Руководство пользователя

Страница: 22 / 100

9
I
TEM
L
ABEL
D
ESCRIPTION
S
EE PAGE
28.
Enters and confirms settings in the OSD.
Displays the Corner Adj. page.
23
29.
Navigates and changes settings in the OSD.
Quick Menu
– For Horizontal Keystone.
23
30.
EXIT Return to last OSD page.
23
31.
Performs the same function as the right mouse button when the mouse
mode is activated.
32.
PgDn / 2
Perform page down function when mouse mode is activated.
Number for Remote ID setting used.
33.
PATTERN / 5
Displays embedded test pattern.
Number for Remote ID setting used.
34.
/ 7
Increase the volume level..
Number for Remote ID setting used.
22
35.
/ 8
Displays the HELP menu.
Number for Remote ID setting used.
36.
Decreases the volume level.
22
37.
Displays the digital zoom settings bar.
21
38.
COLOR MODE Selects an available picture setup mode.
39.
Wired Jack Connect wire remote to the projector.
Remote control code
The projector can be assigned to 8 different remote control codes, 1 to 8. When several adjacent
projectors are in operation at the same time, switching the remote control codes can prevent interference
from other remote controls. Set the remote control code for the projector first before changing that for the
remote control.
To switch the code for the projector, select from among 1 to 8 in the Basic > Advanced > Remote Control
Code menu.
To switch the code for the remote control, press ID set and the corresponding button from 1 to 8 buttons
on the remote control together for 5 seconds or more. The initial code is set to1. When the code is
switched to 8, the remote control can control every projector.
Note:
If different codes are set on the projector and remote control, there will be no response from the
remote control. When that happens, switch the code for the remote control again.