7
ViewSonic PJ853
E
N
G
L
I
S
H
Menu Button
The MENU button is a small button on the remote control and the large button on the
projector control pad.
Press the Menu button and then use the up, down, right or left arrow indicators (
▲▼
) to
display OnView
®
menus and adjust or select a menu item.
Position Button
The POSITION button is on the remote control only.
Press this button to adjust the position of the screen image. After pressing the
Position button use the up, down, right or left arrow indicators. (
▲▼
).
-
Use the Position button when the input is from a computer (RGB).
NOTE:
Position only works on a magnified image.
Magnify Buttons
The MAGNIFY buttons are on the remote control only.
The Magnify buttons are used to zoom in on part of the projected image.
-
Use the + button to enlarge the projected image.
-
Use the - button to decrease the projected image.
-
Use the OFF button to turn off magnification.
Reset Button
The RESET button shown with the arrow and dot icon is on the projector only. The
RESET button on the remote control has no marking but is labeled RESET.
Press the Reset button to restore the factory default settings.
-
Use Reset to restore the factory default settings if you have made several
adjustments to the projected image and are not satisfied with the result and
want to start over.
Volume Buttons
The VOLUME buttons are on the remote control only.
Use the Volume buttons to adjust the loudness of the audio signal.
-
The up indicator increases the volume.
-
The down indicator decreases the volume.
Mute Button
Use the Mute button to temporarily turn off the audio.
Blank Button
The BLANK button is on the remote control only.
Use the Blank button to display a blank screen showing only the background color.
Freeze Button
The FREEZE button is on the remote control only.
Use the Freeze button to freeze (or hold) an image on screen.
PJ853-.book Page 7 Wednesday, August 16, 2000 11:41 AM
