ViewSonic PJ853
16
E
N
G
L
I
S
H
Installing Battery (for remote control)
• Use a 3V micro lithium battery as shown in the illustration.
• The battery is not rechargeable.
1
Pull the plastic tab from the battery access door when using the new projector for the first time.
2
Pinch the battery holder at the bottom of the remote control and gently pull out the holder with
the battery.
3
Gently pop the battery out of the holder and replace it with a new battery.
4
The + side of the battery should be facing up as shown in the illustration.
5
Push the battery and holder back into the battery slot. The holder should click into place.
Cleaning Instructions
Projector Lens
• Clean the lens with a damp, non-abrasive cloth. Apply a lens cleaning solution or a glass cleaning
solution to the cloth. Do not spray a cleaning solution directly onto the lens.
Projector Case
• Make sure the projector is cool before cleaning.
• Clean the exterior case with a moist cloth using a mild detergent.
WARNING:
Do not use alcohol, benzene, or other chemical cleaners which could damage the case.
Figure 9: Installing the Battery
Pull out
“+” side
Battery Holder
PJ853-.book Page 16 Wednesday, August 16, 2000 11:41 AM
