Viewpro Falcon F390, Руководство пользователя, Страница: 8 / 27

ViewproUAV Tech. Ltd www.viewprouav.com 7 of 27
a: Under the engine power switch (stop switch), the engine is turned off, there is no action in
the middle, and the upper is turned on
b: Airplane mode switch (three-stage switch)
c: Navigation light switch (three-stage switch)
d: Engine starter switch (self-reset segment switch)
Additional levers and knobs can be customized
3.2.2 Connect the aircraft to the main power
When mains power is applied, the plug and battery are connected out of sequence. Do not
move the aircraft within 2 minutes after the system is initialized (other power sources are
temporarily unavailable)
3.2.3 Ground station connection
Connect the remote control Bluetooth, the remote control Bluetooth name is
"SIYI-xxxxxxxxx". Open the mission planner software, select the serial port number mapped
by the remote controller's Bluetooth for the port, the baud rate is 57600, and connect.
3.3 Remote control logic check
3.3.1 Inspection of fixed-wing rudder surfaces
The ground station flight mode is set to Manual. Toggle the remote control to check whether
the corresponding rudder surface activity and logic are normal.
3.3.2 Check the throttle servo