4
•
Do not block or cover slots and openings in the printer's cabinet; do not insert objects through
slots.
•
Use only the type of power source indicated on printer's label.
•
Connect all equipment to properly grounded electrical outlets.
•
Do not connect the ink attachment to any external power supply.
•
Do not use frayed or damaged power cord.
•
The use of an extension cord with the printer is not recommended.
•
Detach printer from power during the ink attachment installation or removal process.
•
Unplug printer before cleaning it; always clean it with a piece of damp cloth only.
•
Do not spill liquid into printer or the ink attachment.
•
Only adjust those controls that are covered by the operating instructions.
•
Except as specifically explained in the user's manual, do not attempt to service the printer by
yourself.
•
Detach the printer from power source and refer to qualified service personnel under the following
conditions:
o
If the power cord or plug is damaged.
o
If liquid has entered the printer or the ink attachment.
o
If printer or ink attachment have been dropped or the cabinet is damaged.
o
If the printer or ink attachment do not operate properly or exhibit a distinct change in
performance.
D. Specifications
ViewPlus InkConnect for Tiger Elite and Premier Embossers
Character Sets
Use any font at any size
Print Resolution
100 dots per inch
Print Speed
up to 110 combined print and braille characters per second in draft mode
(actual speed depends on embosser model)
Print Mechanism
Uses two HP C6602A cartridges, capacity: 15mg of ink, equals approx. 7
million characters
Paper Feed Method
Tractor feed only
Paper Size
Any tractor-fed braille or office paper 4-12 inches wide
Paper Weight
Any weight from thin computer paper (starting at 75 g/m
2
) to thick card
stock, photo paper or braille paper (up to 230 g/m
2
)
Dimensions
Length
Width
Height
Weight
8.2 inches (20.9 cm)
22.3 inches (56.7 cm)
10.0 inches (25.4 cm)
14 pounds (6.35 kg)
Connectivity
USB or LAN connection through Tiger Elite or Premier embosser
Power Consumption
Standby < 0.5 W
Average Print 90 mA @ 5 V, 300 mA @ 42 V
