13
•
Paper size
- Standard page sizes or custom page sizes may be selected.
•
Margins -
Set the margins to 0 if you are using a program which sets its own margins.
•
Line Settings
o
Automatic text wrapping
- When this option is checked, the text is wrapped to the next
line. If it is not checked, it is possible if the line is too long to lose characters.
Extra space between lines -
The default spacing is 0.05 inches with 0.00 extra
space between lines. It increases in 0.05 increments up to 0.25 inches.
•
Media Type
- This allows you to select the type of media you are printing on to load pre-set punch
force values that optimize printing on that media. You may view the values for pre-set media
types, or you can add your own if you are printing on a special type of media.
•
Media Source
- This allows you to select the source of the media. The default is 'Tractor'.
•
Text/graphics mode
- Choose either text or graphics.
•
Dots per character
- Choose between 6 or 8.
•
Download custom braille table
- A user defined braille character set from ASCII value 32 to 127
can be downloaded to the ViewPlus Elite or Premier. The braille character sets are typically stored
in braille conversion table files (*.BCT). This file format is editable in Notepad and allows the user
to create user definable conversion tables. Go to the ViewPlus Support Page for additional
information about this mode.
•
Braille dot height
- This combo box allows you to choose high, normal or low braille dots. This
can be useful if you are having difficulty reading the dots due to them being too high or too low.
•
Duplex mode
- When this option is checked, documents will be printed double-sided (interpoint).
C. Service Settings
The service tab provides several servicing functions for your ViewPlus Tiger Elite or Premier embosser and
InkConnect. Most users will not need to use anything but the ink servicing functions (accessed through
the Ink Skew Alignment, Ink-Emboss Alignment, Cartridge Spacing Calibration and Check Ink Cartridge
Level buttons) on this tab. Please
do not
adjust any other settings on this page unless directed to do so
by ViewPlus Support. Adjusting embosser settings without the assistance of a trained ViewPlus technician
may result in permanent damage to the embosser.
•
Print Head Alignment
- This prints the alignment page for the embossing head. Select which
embossing head to align by choosing the button under the "Top" or "Bottom" section. The "Top"
settings are used for the front of the page, which is the top side of the paper as it comes out of
the embosser. The "Bottom" settings are used for the back side of the page, which is the bottom
side of the paper as it comes out of the embosser. In order to produce perfect dots on the special
Tiger platen, the embossing head needs to be aligned with the grooves. This procedure prints out
a 20 by 24 pattern of dots of which one dot looks perfectly aligned. After the test page has been
printed, select the best aligned row and column and enter their values in the "Vertical" and
"Horizontal" boxes, respectively. The columns and rows are numbered from the left to right and
top to bottom, respectively, starting with 1.
•
Emboss Skew Calibration
- This prints the skew calibration pattern. Select which embossing
head to set the print skew for by choosing the button under the "Top" or "Bottom" section. The
"Top" settings are used for the front of the page, which is the top side of the paper as it comes
