VIEWONHOME VOH1001, Инструкция по установке и эксплуатации

Страница: 3 / 21

4 5
Quick Start-up Guide
First
Store a phone number
To interact with the control panel by SMS, by phone call and/or from the app, at least one phone number
must be stored in the control panel. Please refer to the on “Store Phone Numbers” on page
7 of this manual.
Change the language
By default the language of the kit control panel is set to English. If you wish to change the system
language, refer to the “Change system language” on page 12 of this manual. “System
language” refers to the language of the SMS you receive from the control panel.
Arm / Disarm the system
The alarm system can be armed or disarmed by SMS, by App and by phone call.
By SMS
To arm the system: Send “1” by SMS to the number of your system’s SIM card.
To disarm the system: Send “0” by SMS to the number of your system’s SIM card.
By app
Click on “Arm” in the app to arm the system, and “Disarm” to disarm the system. The app is available
for download on the App Store and Google Play.
Register wireless accessories
Control by Phone Call
Method 1
When an alarm has been triggered, the control panel dials the pre-stored phone numbers. When
you pick up the phone, control the panel from distance according to the in the table
below).
Method 2
1. Dial the telephone number of the SIM card in your control panel.
2. Enter your user code, followed by ”#”. ey you press on your phone, you hear one beep
3. Select the to control the panel (see in the table below).
Note
The call will end ally if you do not send any command within 30 seconds.
Voice
Command
Press “1“ Arms the system
Press “0“ -
-
-
-
-
-
-
Stops monitoring without hanging up
Press “ “
Press “6“ Turns all sirens
Press “9“
Press “#“ -
-
Exits control by phone call
- Stops call recycles
Note
In GSM mode, the audio monitoring is not limited in
Hard Reset
Press the Connect and the Panic (SOS) simultaneously. Release them 3 beeps.
Wait 10 seconds. The panel beeps twice: the system is restored to default
Stored phone numbers and accessories will also be deleted.
successful.
If the accessory has already been registered, the control panel will beep twice. The first accessory
registered is assigned to zone 1, the second accessory registered is assigned to zone 2, etc. Zones
learn how to rename zones).
Disarms the system and turns the siren off
Stops the built-in siren and the wireless siren (if connected to the control panel)
Turns the wireless siren on (if connected to the control panel)
Turns all sirens off