VIETA IP10, Руководство пользователя

Страница: 9 / 18

8
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6
Using the Unit
Listening to music from an i-Pod (i-Pod player is not supplied):
1. Place the appropriate corresponding universal i-Pod adaptor, included with i-Pod, into
this unit i-Pod docking location, then connect your i-Pod.
2. Press the button for 2 seconds or more. A LED will indicate that the unit is on.
3. Press the
button repeatedly to select “ ” source.
4. The i-Pod player stored music will be played automatically, press the (
BF
) button
to temporarily stop the playing, press the button again, it will continue to play.
5. Adjust volume using the volume control knob on the front of the unit or + / - buttons on
the remote.
6. Press the (
H
) button once or more to skip previous one or more tracks of the disc.
Press and hold the (
H
) button to search for the position that you intend to start
playing.
Press the (
G
) button once or more to skip forward one or more tracks of the disc.
Press and hold the (
G
) button to search for the position that you intend to start
playing.
7. Press the button on the remote in playing mode, all sound will be muted. Press the
button again or + / - buttons on the remote or rotate the volume control knob on the front
of unit to resume sound.
Note:
* In DC power on mode, directly dock your i-Pod player in the docking for charging.
* Select and play music through your i-Pod controls.
* For the purpose of saving power, recharging of your i-Pod is NOT SUPPORTED when
the main set is in the STANDBY MODE.
Listening to music from an USB or Memory card (SD or MMC):
By connecting a USB mass storage device (including USB flash memory, USB flash
players or memory cards) to the unit, you can enjoy the device's stored music through the
speakers of the unit.
1. Press the button for 2 seconds or more. A LED will indicate that the unit is on.
2. Insert the USB device's USB plug into the
port on the rear of the unit or insert the
memory card into the port on the rear of the unit.
3. Press the button repeatedly to select “ ” or “ ” source.
4. The i-Pod player stored music will be played automatically, press the (
BF
) button
to temporarily stop the playing, press the button again, it will continue to play.
Press and hold the (
BF
) button for 2 seconds or more to stop the playing.
5. Adjust volume using the volume control knob on the front of the unit or + / - buttons on
the remote.
6. Press the (
H
) button once or more to skip previous one or more tracks of the disc.
Press and hold the (
H
) button to search for the position that you intend to start
playing.