9
Press the (
G
) button once or more to skip forward one or more tracks of the disc.
Press and hold the (
G
) button to search for the position that you intend to start
playing.
7. Press the
button on the remote in playing mode, all sound will be muted. Press the
button again or
+
/
-
buttons on the remote or rotate the volume control knob on the front
of unit to resume sound.
Listening to Radio Broadcasts:
This unit has built-in FM antenna.
If reception is poor, please connect the supplied FM antenna to the FM antenna socket on
the rear of the unit, then adjust the position of the FM antenna for the best reception.
Caution:
Disconnect the audio cable when using the FM antenna.
Tuning in a Station
1. Press the button for 2 seconds or more. A LED will indicate that the unit is on.
2. Press the
button repeatedly to select “
” source.
3. Select a station using one of the following methods.
Manual Tuning
Repeatedly press the , (
H
,
G
) buttons to move from frequency to fre-
quency until you find the station you want.
Auto Tuning
Press and hold the , (
H
,
G
) buttons for 2 second or more, the frequency
changes down, or up, automatically until a station is found.
4. Adjust volume using the volume control knob on the front of the unit or
+
/
-
buttons
on the remote.
5. Press the
button on the remote in playing mode, all sound will be muted. Press
the button again or
+
/
-
buttons on the remote or rotate the volume control knob on
the front of unit to resume sound.
Presetting Stations
1. Tune in the desired station.
2. Press and hold the (
BF
) button for 2 seconds or more, the preset number will
blink on the display and the frequency will be displayed.
3. Press the , (
H
,
G
) buttons once by once to select the preset number, you
can preset up to 10 stations.
(
H
)
Decreases the preset number by 1
(
G
)
Increases the preset number by 1
4. Press the (
BF
) button to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a
preset number.