7
EN
KEN002VAC
v1• 11.11.2020
EMERGENCY FUNCTION & AUTO-RESTART FUNCTION
EMERGENCY FUNCTION
AUTO-RESTART FUNCTION
If the remote controller fails to work or maintenance neces-
sary, proceed as following:
Open and lift the front panel up to an angle to reach the
emergency button.
For heating model, press the emergency button at first
time, the unit will operate in COOL mode. Press at second
time within 3 seconds, the unit will operate in HEAT mode.
Press at third time after 5 seconds, the unit will turn off.
For cooling only model, press the emergency button at first
time, the unit will operate in COOL mode. Press again, the
unit will turn off.
The appliance is preset with an auto-restart function. In
case of a sudden power failure, the module will memorizes
the setting conditions before the power failure. When the
power restores, the unit will restart automatically with the
previous settings preserved by the memory function.
CAUTION
●
The shape and position of the emergency button may be different according to the model, but their
function is the same.
emergency
button
front
panel
The emergency button is located on E-box
cover of the unit under the front panel.
REMOTE CONTROLLER
No.
Button Function
1
To turn on or off the air conditioner.
2
OPTION
To activate or deactivate optional function(Check below table).
3
To decrease temperature, time setting or choose the function.
4
To increase temperature , time setting or choose the function.
5
ECO
To activate / deactivate the ECO function which enables the unit automatically to sets the operation
to achieve energy savings.
6
TURBO
Press this button to activate/deactivate the Super function which enables the unit to reach the preset
temperature in the shortest time.
7
MODE
To select the mode of operation(AUTO COOL DRY FAN HEAT)
8
FAN
To select the fan speed of auto/mute/low/mid/mid/high/high/turbo, cycle as below
Flashing
9
To activate/deactivate the swing of horizontal flap(up/down).
10
To activate/deactivate the swing of vertical flap(left/right).
