Version: 4.0
KEN002DH 23.02.2021
[ EN
●
7 ]
The parts required for step 3
8 pcs wall plugs
2 pcs screws (ST4x30mm)
3. Using a drill bit with an 8 mm diameter, make 8 holes in the wall at the position that you reserve for installing
the chimney and cooker hood body. See Pic 2.
Pic. 2
1
2
3
4
1 - hole for inside chimney
2 - hole for outside chimney
3 - hole for hood body
4 - safety hole
2 pcs wall plugs
2 wall plugs + screws
(ST4x30mm)
2 pcs wall plugs
The parts required for step 4
1 pcs cooker hood
2 pcs screws (ST4x30mm)
4 Insert wall plugs into the holes for hood body that you have drilled on the wall. And fasten 2 pcs screws
(ST4×30 mm) in the hole, leaving them 2 mm out of the wall. See Pic 2.
5 Hang the cooker hood onto the screws of the hole for hood body. See pic 3.
