25
5354 788 - 03
Vitorond 200, VD2A Series Installation
Connections
Enclosure Installation
All components required for mounting the insulation are
included with the insulation material.
1. Mount four threaded extension bolts
A
into threaded
openings of the rear section.
2. Install rear insulation blanket.
3. Install rear panels.
4. Install Temp-control sensor
aJ
A
A
between third
and fourth section (counting from the back).
5. Tie sensor harness to tie rods using plastic straps
(not supplied).
IMPORTANT
Ensure all extension bolts and flue gas collar bolts on rear
section are tightened. Ensure extension bolts are threaded
in a straight fashion.
