Vitodens 200-W B2HE Operating
6167 814 - 01
8
Intended Use
General Information
Product Information
Intended use presupposes that a fixed installation in
conjunction with permissible, system-specific components
has been carried out.
Commercial or industrial usage for a purpose other
than heating the building or DHW shall be deemed
inappropriate.
Any usage beyond this must be approved by the
manufacturer in each individual case.
Incorrect usage or operation of the boiler (e.g. the boiler
being opened by the system user) is prohibited and results
in an exclusion of liability. Incorrect usage also occurs if
the components in the heating system are modified from
their intended use (e.g. if the flue gas and ventilation air
paths are sealed).
The temperature shown on the display is the target room
temperature.
In weather-compensated operation, the supply
temperature level is controlled according to the outside
temperature.
The lower the outside temperature, the higher the supply
temperature. This means that more heat is provided for
central heating on cold days than on warmer days.
In weather-compensated operation, 1 heating circuit
without mixing valve and up to 3 heating circuits with
mixing valve can be operated with the control unit.
The temperature shown on the display is the boiler water
temperature.
In constant operation the boiler provides heating water
with a constant supply temperature regardless of the
outside temperature.
In constant operation, 1 heating circuit without mixing
valve and up to 3 heating circuits with mixing valve can
be operated with the control unit.
Operation
The control unit is integrated into the boiler and controls
all functions of your system. The control unit is operated
via a 7 inch color touchscreen.
A WiFi module is integrated into the control unit.
This means the system can also be operated remotely
via the internet and the “ViCare” app.
In weather-compensated operation, you can set some
functions using a remote control.
The control unit is a boiler and heating circuit control
unit for the following operating modes:
Weather-compensated operation
Constant (continuous) operation
The boiler is only intended to be installed and operated
in sealed unvented heating systems with due attention
paid to the associated installation, service and operating
instructions. It is only designed for the heating of water
that is of potable water quality.
Your heating contractor will configure the operating mode
during commissioning in accordance with your heating
system. These instructions describe both operating
modes.
Weather-compensated operation
Constant operation
