Vitodens 200-W B2HE Operating
6167 814 - 01
30
Additional Adjustments
Switching Internet Access On or Off
(continued)
Static IP address
Prerequisite: Your WiFi is configured so that the subscriber
addresses in the network (IP addresses) are not automatically
assigned.
Tap the following buttons:
1.
2.
“Settings”
3. “Internet”
4. “Network selection”
5. Available WiFi networks are displayed.
Note:
Tap to refresh the list of available WiFi
networks.
6. Select the network.
7.
8. “STATIC” for static IP address
9.
to confirm
10. Enter network data:
IP address
Subnet mask
Standard gateway
Primary DNS server
Secondary DNS server
11.
to confirm
Note:
An internet connection only exists if the selected
WiFi is connected to the internet. Check your WiFi
settings if necessary.
Establishing a WiFi connection
Note:
Prerequisite: WiFi is switched on.
Tap the following buttons:
1.
2.
“Settings”
3.
“Internet”
4. “Network selection”
Available WiFi networks are displayed.
Note:
If a connection as already exists, “Connected”
is shown next to the relevant network.
If you want to use an invisible WiFi network:
Tap and enter the name of the WiFi network
(SSID) and the password.
5. Select WiFi.
Note:
Use to refresh the list of available WiFi
networks.
6.
to confirm
7. If your selected WiFi is not protected
:
to acknowledge the connection message
or
If your selected WiFi is protected
:
Enter the password (maximum 40 characters).
to confirm your password
8. to confirm the prompt about internet use
The default display shows
.
Note:
If the connection was not established, an
error message is shown.
An internet connection only exists if the
selected
WiFi is connected to the internet.
Check your WiFi settings if necessary.
