Vitodens 200-W B2HA 88-150, 311- 530 Technical Data
19
5683 718 - 19
Boiler Mounting
Model B2HA 88, 100, 311, 352 Wall Mount
1. Remove the external accessories connection box
cover.
2. Loosen the screws at the bottom of the boiler
(do not remove completely).
3. Remove the front encloser panel (lift up and pull
away from the boiler).
4. Mount boiler onto the mounting bracket.
5. Adjust the levelling screws to ensure the boiler
is level. Place the round bubble level on top of the
boiler to verify.
6. Connect the boiler to the installation fittings.
CAUTION
Whichever mounting method is used, ensure that the
bracket is tightly and securely fastened to wall. Failure
to secure boiler properly could cause boiler to loosen,
posing a severe safety hazard.
Fitting the wall mounting bracket
See the installation instructions applicable to the
mounting bracket on each type of material.
CAUTION
The boiler must be level both vertically and horizontally
to ensure proper draining of the condensate.
