Viessmann VITOCAL 350-A, Инструкция по установке и обслуживанию

Страница: 243 / 256

243
Parameter Page Setting range Delivered
condition
Commission-
ing
Electric heater
Inst. heating water
heater 189 Yes/No No
Heating with electro 189 Yes/No Yes
Max. stage E heat 189 1 to 3 3
Stage at power-OFF 190 0 to 3 0
Hydraulics
HP for drying a building 191 Yes/No No
Screed program 191 0 to 12 0
Set flow ext. demand 193 0 to 70 °C 50 °C
Heat/DHW diverter
valve 194 Yes/No No
Heating water buffer cylinder
Buffer cylinder 195 Yes/No No
Switch t buffer cyl. buffer
cyl. 195
Fixed temperature 195 1 to 70 °C 50 °C
Hysteresis 195 2 to 20 K 5 K
Max. temperature 196 1 to 70 °C 60 °C
Heating circuit A1
Standard room temp 197 10 to 30 °C 20 °C
Reduced room temp 197 10 to 30 °C 16 °C
Switching times HC 197
Remote control 197 Yes/No No
Heating curve level 197 -15 to 40 0
Heating curve slope 197 0 to 3.5 0.6
Room t hook-up slope 197 0 to 50 10
Room t hook-up 198 0 to 3 3
Max. flow temperature 198 10 to 70 °C 40 °C
Heating circuit M2
Standard room temp 197 10 to 30 °C 20 °C
Reduced room temp 197 10 to 30 °C 16 °C
Switching times HC 197
Remote control 197 Yes/No No
Heating curve level 197 -15 to 40 0
Heating curve slope 197 0 to 3.5 0.6
Room t hook-up slope 197 0 to 50 10
Room t hook-up 198 0 to 3 3
Max. flow temperature 198 10 to 70 °C 40 °C
Commissioning/service reports
Control parameters report
(cont.)
5414 828 GB
Service