12
5600 336 - 04
CombiPLUS Kit for Vitodens 100-W, WB1B Quick Start
Re-installing Covers
Reinstalling the covers for the boiler, power
pump module and the CombiPLUS
A
.
1
Align and install the cover of the power
pump module and lock into place by rotating
the four captive screws 90 degrees with a
Phillips screw driver.
2
Rotate the boiler controls up and in.
Ensure that the locking clips are engaged.
3
Install the boiler cover by inserting it straight
on from the front.
4
Tighten the boiler housing captive screws
(located at the bottom front of the boiler).
5
Install the CombiPLUS
A
cover by inserting
it straight on from the front.
6
Using a Phillips screw driver, install and
tighten all four screws holding the
CombiPLUS
A
cover.
1
2
3
4
6
5
A
Installation
