26
Further settings
Setting the limit for summer and winter time
The limit for summer/winter is the outside temperature, at which the control
unit changes over from summer to winter operation and vice−versa, if the
operating mode selector is set to " ", "
" or " ".
Basic setting: 18
º
C
Winter operation
Heat pump and heating circuits active
DHW heating active
Frost protection of the heat pump.
Summer operation
Heating circuits switched off
Heat pump only active for DHW heating
Frost protection of the heat pump
Additional cooling function (not for type AW)
Summer/winter limit
Cooling operating:
50.0
º
C
Sum/Win change−ov:
18.0
º
C
±
°
+0.5
0.5
STANDA
OK
Open the programming unit flap and
press the following keys:
1.
B
for
"Installation
parameters"
.
2.
B
for
"Summer/winter
limit"
.
3.
±
/
°
press until the required
switching point is
highlighted.
4.
+0.5
/
0.5
press until the required
outside temperature is
shown.
5.
OK
press to confirm.
Close the programming unit flap.
5592
415GB
