10
Quick start
Selecting the party program
Select party program if you want to heat for short periods and independent of
the selected operating mode and set switching times (e.g. if you want to stay
up longer than usual, because you have guests).
The following will result:
Central heating at standard temperature
and
DHW heating in accordance with set switching times (see page 21).
Please note:
For systems with heating water buffer storage units, the party program will
only affect the heating circuits.
Set party time
Party finishes at:
Tuesday01.01.02 00:00
<
>
+
BACK
OK
Activating the party program
Open the programming unit flap and
press the following keys:
1.
B
for
"Installation
parameters"
.
2.
C
for
"Set party time"
.
3.
<
/
>
press until the value to
be set is highlighted.
4.
+
/
press until the required
value is shown.
5.
OK
press to confirm; party
mode is now activated.
You will exit the menu
with the
BACK
key
without
saving these
settings. Party mode is
then
not
activated.
Close the programming unit flap.
The display window shows "PARTY".
5592
415GB
