background image

9

5712 718  v1.0

Vitotronic 100, KW10B  Operating and User’s Information

Operation

Service Notice for your Heating System

Additional Safety Requirements

WARNING

The are no user-serviceable components on the boiler, 
burner, control or on the heating system. Contact a 
qualified heating contractor for service!

CAUTION

Ensure the mechanical room and the hot water heating 
boiler itself, is kept clean.

WARNING

Failure to protect against frozen pipes could result in burst 
water pipes, serious property damage and/or personal 
injury. Boiler may shut down. Do not leave your home 
unattended for long periods of time during freezing 
weather conditions without turning off the water supply 
and draining water pipes or otherwise protecting against 
the risk of frozen pipes.

We strongly recommend that you have your heating system checked and serviced by a qualified heating contractor on 
an annual basis to ensure a safe and energy efficient operation.

A service contract is advisable.

Boiler

Every boiler must be cleaned within certain time frames. 
A lack of cleaning causes soot build-up in the combustion 
chamber which raises the flue gas temperature and 
reduces the efficiency of your heating system.

System

Ensure that a qualified heating contractor checks all 
system components such as the expansion tank, the 
pressure relief valve, the pump(s), the zone valves, the 
low water cut-off and all other system componentry 
regularly.

Carbon monoxide

The U.S. Consumer Product Safety Commission strongly 
recommends the installation of carbon monoxide detectors 
in buildings in which gas-burning equipment is installed. 
Carbon monoxide (CO) is a colorless, odorless gas, which 
may be produced during incomplete combustion of fuel 
and/or when the flame does not receive an adequate 
supply of combustion air.

Carbon monoxide can cause severe personal injury or loss 
of life.

Therefore, carbon monoxide detectors that are in 
compliance with a nationally recognized standard (e.g. 
ANSI/UL 2034-2002, CSA 6.19-01) should be installed 
and maintained in buildings that contain gas-burning 
equipment.

Note:

 Viessmann does not test any detectors and makes  

 

   no representation regarding any brand or type of  

 

   detector.

Frozen water pipe hazard

Your heating boiler is designed to provide a warm and 
comfortable living environment. It is NOT designed to 
ensure against freezing of water pipes. 
The boiler is equipped with several safety devices that 
are designed to shut down the boiler and to prevent it 
from restarting in the event of various unsafe conditions.
If your boiler remains off for an extended period of time 
during cold weather, water pipes may freeze and burst, 
resulting in extensive water damage and conditions in 
which mold could grow. Certain molds are known to 
cause respiratory problems, as well as to pose other 
serious health risks. In case of water damage, immediate 
measures should be taken to dry out affected areas as 
quickly as possible to prevent mold from developing.

If your home will be unattended for an extended period of 
time during cold weather, you should...

Shut off the water supply to the building, drain the water 
pipes and add an antifreeze for potable water to drain 
traps and toilet tanks. Open faucets where appropriate.
or
Have someone check the building frequently during cold 
weather and call a qualified service agency if required.
or
Install a reliable remote temperature sensor that will notify 
somebody of freezing conditions within the home.

Содержание 7834 238













Отзывы: