Viega Visign, Инструкция по эксплуатации, Страница: 11 / 12

3.3 Faults, faults and remedy
Error Cause Remedy
Urinal does not flush Shut-off valve closed Open shut-off valve
Cartridge valve dirty or damaged Clean cartridge valve, if necessary,
replace
Ä
Chapter 3.4.2 „Cleaning
cartridge valve“ on page 11
Flush is too weak Shut-off valve is not open far
enough Open shut-off valve
Cartridge valve dirty or damaged Clean cartridge valve, if necessary,
replace
Ä
Chapter 3.4.2 „Cleaning
cartridge valve“ on page 11
Urinal flush runs through Cartridge valve dirty or damaged Clean cartridge valve, if necessary,
replace
Ä
Chapter 3.4.2 „Cleaning
cartridge valve“ on page 11
3.4 Care and maintenance
3.4.1 Maintenance tips
Normal soap or a mild cleaning agent can be used for regular care and
prevention of lime scale on the flush plate. Under no circumstances
should scouring agent or scratching objects be used.
Strong stains can be removed using typical household cleaner. Rinse
the detergent thoroughly with clear water after the prescribed exposure
time. There should be no residue on the components.
3.4.2 Cleaning cartridge valve
The cartridge valve may be cleaned, if necessary. Proceed as follows:
Remove the flush plate from the basic panel.
INFO! Figure shows model 8351.2 as an example.
Handling
Visign for More 104 equipment set 11 from 12