manualshive.com logo in svg

Viega Prevista Dry 8535.32, Инструкция по эксплуатации, Страница: 37 / 38

Поделиться
Скачать
Viega Prevista Dry 8535.32 Скачать руководство пользователя страница 37

CAUTION! 

Risk of crushing
The cover plate shifts in parallel with the wall surface during

the height adjustment. Due to this, there is the risk of

crushing in the areas above and below the cover plate.
– Keep your hands away from the dangerous areas.

Push the actuation button to unlock.

ð

The washbasin is unlocked and lifts hydraulically (if necessary,

carefully pull it up).

Press the actuation button again when the desired positioned has

been reached.

ð

The washbasin is secured in the chosen position.

3.4

Cleaning and maintenance

The height adjustment mechanism is maintenance-free.
Maintenance and cleaning work may only be carried out by specialist

trade professionals or qualified experts.

Clean the cover plate using only soap-based cleaning agents.
Scouring milk and cleaning agents or disinfectants containing the fol‐

lowing ingredients may not be used:

Lifting the washbasin

4501

Cleaning

Handling

Prevista Dry washbasin element with individually adjustable ceramic height

37 from  38

Содержание Prevista Dry 8535.32







































Отзывы:

Нет отзывов