2 Product information
2.1
Intended use
2.1.1
Areas of use
The drain is designed for small to medium volumes of water, which
occur in e. g. residential building.
Technical information, see
Chapter 2.2.2 ‘Technical data’ on page 7.
The drain with a horizontal drain support is suitable for both mounting in
a floor recess as well as for mounting on the floor.
The low drainage capacity and water head seal of 30 mm
do not fulfil the provisions of EN 1253-1.
Check if the drainage capacity is sufficient before mounting!
2.1.2
Media
The drain is intended to be in constant operation for the channelling off
of typical household wastewater in acc. with DIN 1986-3.
n
The short-term temperature of the wastewater may reach up to
95° C. The temperature must be considerably lower in constant
operation.
n
The pH value must be higher than 4 but lower than 10.
It is not permitted to introduce wastewater which would damage the
product material.
Product information
Advantix bathroom drain
6 from 25
