Push union nut, sliding ring and seal onto the drain elbow.
Screw the union nut on the drain unit.
Align the odour trap in such a way that the drain elbow can be con-
nected to the wastewater pipe. Turn the drain for this purpose.
Push wastewater pipe in the drain elbow.
3.2.5
Mounting equipment set
The equipment set is not included in the scope of delivery
and must be purchased separately.
To avoid damage to the rosette and valve cone, only mount the equip-
ment set after finishing all other work on the building site. Proceed as
follows:
Align and install rotatable rosette into the overflow unit.
Turn rotatable rosette to the right (open position) and hold.
Fit valve cone.
The pin on the underside of the valve cone must be led through the
middle hole of the valve top into the recess in the drain unit and be
felt to click into place (see detailed illustration).
Handling
Rotaplex Drain/Overflow Functional Unit
14 from 16
