n
Do not repair damaged components.
n
Contaminated components may not be installed.
Observe the following when mounting:
n
minimum / maximum installation depth
n
use suitable tools
Choose the place of installation so that the fitting is easily
accessible, simple to operate and the insulating shell can be
well mounted.
For information, refer to the instructions for use of the Profipress, San‐
press and Sanpress Inox systems.
For information, refer to the instructions for use of the Profipress, San‐
press and Sanpress Inox systems.
3.1.4
Required tools
The following tools are required for production of a press connection:
n
pipe cutter or a fine-toothed hacksaw
n
deburrer and coloured pen for marking
n
press machine with constant pressing force
n
Press jaw or press ring with corresponding hinged adapter jaw, suit‐
able for the pipe diameter and suitable profile
Fig. 10: Press jaws
Recommended Viega press machines:
During assembly
Laying and fixing pipes
Length expansion
Handling
Easytop concealed straight seat valve with SC-Contur
17 from 23
