Vido WD060213010, Руководство пользователя

Страница: 8 / 20

30L/38L SILENT OIL FREE AIR COMPRESSOR ENG
condition such as fire or bursting.
t) When transporting air compressor, keep level and place on a protective mat. Do not place
air compressor on its side.
Such precautions reduce the risk of fire or danger to personnel from oil
fumes.
4) Service
a) Maintenance performed by unauthorized personnel may result in misplacing of the internal
components which could cause serious hazard.
We recommend that all air compressor service be
performed by an authorized service station.
b) Develop a periodic maintenance schedule for your tool. When cleaning an air compressor
be careful not to disassemble any portion of the tool since internal components may be
misplaced or safety components may be improperly mounted.
Certain cleaning agents such as
gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts and o-rings.
c) When servicing the air compressor, use only recommended replacement parts. Follow
instructions in the maintenance section of this manual.
Use of unauthorized parts or failure to
follow maintenance Instructions can cause a risk of injury.
d) Replace missing or damaged warning labels. Refer to schematic for correct placement and part
number.
e) Maintain air compressor with care. Keep the air compressor clean and lubricated. Properly
maintained tools are less likely to break and cause injury. Any alteration or modification is a misuse and
may result in a dangerous condition. Clean the tool at least daily and lubricate as required.
f) When not in use, store the air compressor out of reach of children and other personnel
unfamiliar with air compressor operation.
When not in use, the tool should be disconnected and
stored in a dry place. Vent the air tank. Keep out of reach of children. Lock the storage area. Air
compressor can be dangerous in the hands of users unfamiliar with its operation.
SAFETY RULES FOR AIR COMPRESSORS
a) Power cord plugs must match the outlet. Never modify the plug in any way. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces such as pipes, radiators. There is an
increased risk of electric shock if your body is earthed or grounded.
c)
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging. Keep cord
away from heat, oil, sharp edges or moving parts. Replace damaged cord immediately. Damaged
or entangled cords increase the risk of electric shock.
d)
Do not expose this air compressor to rain. Do not use in damp or wet locations. Moisture
increases the risk of electric shock with this equipment.
e)
Do not touch plug with wet hands. Moisture increases the risk of electric shock with this
equipment.
f)
Keep all electrical connections dry and off the ground. Do not allow electrical connections
to lay in water or in such a position where water could come into contact with cord and
connection.
Moisture increases the risk of electric shock with this equipment.
g) When operating a tool outdoors, use an extension cord suitable for outdoor use and with
correct amperage capacity. Use of a cord rated for outdoor use reduces the risk of electric shock.
h) Always disconnect air compressor from power supply, vent air tanks, and allow air
compressor to cool before servicing. Air compressors with automatic pressure controls can restart
8