Vido WD010220750, Руководство по эксплуатации

Страница: 7 / 16

750W/850W IMPACT DRILL
ENG
7
possible. Holding the work by hand or against your body is unstable and may lead to loss of control.
7) Do not use damaged or worn drill bits.
8) Make sure drill bit are tightened securely in chuck.
9) Do not start the drill with the chuck key in chuck.
10) Be sure no one is below when using the tool in high locations.
11) After long working periods, external metal parts and accessories could be hot.
12) Before you lay down the power tool, make sure that all moving parts have come to a stop.
13) When an extension cord is required you must ensure it has the correct ampere rating for your
power tool and that it is in a safe electrical condition.
14) Fully unwind extension cords to avoid potential overheating.
DOUBLE INSULATION
The power tool is double insulated. This means that all the external metal parts are electrically
insulated from the main power supply. This is done by placing insulation barriers between the
electrical and mechanical components making it unnecessary for the power tool to be earthed.
IMPORTANT NOTE
Be sure the supply is the same as the voltage given on the rating plate. The power tool is fitted with
a two-core cable and plug.
Remove the main plug from socket before carrying out any adjustment or servicing.
SYMBOLES
To reduce the risk of injury, user must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice