VIDIR CAROUSEL MATE, Руководство по обслуживанию

Страница: 28 / 50

Table Of Contents
Carousel Mate
Cutter Cover Installation ···············································································1
Hold Down Arm Spacer Installation ······························································4
Cutting Bar
Cutter Cover Installation ···············································································5
Counter Arm Replacement············································································8
Final Installation of Counter Arm·································································10
Hold Down Arm Spacer Installation ····························································11
Cutter Cover Install—020811
Cutter Cover Install—020811 pg. 13
Cutting Bar—Cutter Cover Installation
Hold Down Arm Spacer Installation
You will need to install spacers to be sure the cover does not hit the hold down lever.
Kit Includes: Hold down arm Spacers (4), Screw 1/4” x 1 1/4” (4)
Tools Required:
Screw Driver
1. Rotate the carousel so there is a roll above and a roll below the cutter to make
space for access to the hold down arm. Remove the existing screws to remove
the hold down tube and toggle clamp. Be sure to put your hand under the spacers
so they don't drop.
2. Insert spacers provided (Item # 1) and insert 1/4” x 1 1/4” screw (item# 2) pro-
vided. You will need to do this on both ends of the cutting bar.