VIDIR CAROUSEL MATE, Руководство по обслуживанию

Страница: 30 / 50

Cutter Cover Install—020811 pg. 2
Carousel Mate—Cutter Cover Installation
Cutter Cover Installation
The following instructions will describe the process of installing the cutter cover on
your carousel mate. Please follow the instructions carefully to ensure proper
installation.
Kit Includes: Cutter Cover, Set Screws (4), Hex Spacer (4)
Tools Required: 9/16” Wrench, 1/8” Allen Wrench
1. Crank the cutter to a position where you can access it to install the cutter cover.
BE SURE HANDS ARE CLEAR OF THE TRACK.
2. Remove wing nuts from the wheels of your cutter. (Some cutters may have plain
nuts instead of wing nuts)
Cutter Cover Install—020811 pg. 11
Cutting Bar—Cutter Cover Installation
3.Remove the counter from the arm.
4.Fasten the counter to the provided arm.
5.Slide the counter arm(1) onto the existing mount of the cutting bar using the pro-
vided bolt(2). Flip the counter arm down(3) to set in place.