Vidipac VSW7242, Руководство пользователя

Страница: 24 / 288

24
Provide the NTP IPv4 or IPv6 address of this switch. IPv6 address is in 128-bit records represented as
eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It can also represent
a legally valid IPv4 address. For example, '::192.1.2.34'.
Buttons
Save: Click to save changes
Reset: Click to undo any changes made locally and revert to previously saved values
4.1.5 System Log Configuration:
System Log is useful to provide system administrator monitor switch events history. The switch
supports syslog server mode. User can install the syslog server in one computer, then
configure the server address and event types in the switch's system log configuration. When
the events occur, the switch will send information or warning message to the syslog server.
The administrator can analysis the system logs recorded in the syslog server to find out the
cause of the issues.
The switch Web UI allows you to Enable the Syslog Server, assign the IP address and assign
the syslog level.
Server Mode
Indicates the server mode operation. When the mode operation is enabled, the syslog message will send
out to syslog server. The syslog protocol is based on UDP communication and received on UDP port 514
and the syslog server will not send acknowledgments back sender since UDP is a connectionless
protocol and it does not provide acknowledgments. The syslog packet will always send out even if the
syslog server does not exist. Possible modes are:
Enable server mode operation.
Disable server mode operation.
Server Address
Indicates the IPv4 host address of syslog server. If the switch provide DNS feature, it also can be a host
name.