Vidipac VSW7242 Скачать руководство пользователя страница 219

Страница: 219 / 288

219

for the following administrative states:

• Port-based 802.1X

• Single 802.1X

• Multi 802.1X

• MAC-based Auth.

Last Supplicant/Client Info

Name

IEEE Name

Description

MAC

Address

dot1xAuthLastEapolFrameSource The MAC address of the last supplicant/client.

VLAN ID

The VLAN ID on which the last frame from the last

supplicant/client was received.

Version

dot1xAuthLastEapolFrameVersion

802.1X-based:

The protocol version number carried in the most

recently received EAPOL frame.

MAC-based:

Not applicable.

Identity

802.1X-based:

The user name (supplicant identity) carried in the

most recently received Response Identity EAPOL

frame.

MAC-based:

Not applicable.

Selected

Counters

Selected Counters

The Selected Counters table is visible when the port is in one of the following administrative states:

• Multi 802.1X

• MAC-based Auth.

The table is identical to and is placed next to the Port Counters table, and will be empty if no MAC

address is currently selected. To populate the table, select one of the attached MAC Addresses from

the table below.

Attached

MAC

Addresses

Identity

Содержание VSW7242

































































































































































































































































































Результаты поиска

Содержание VSW7242

Отзывы:

Бренды по названию

Популярные бренды

Vidipac VSW7242, Руководство пользователя

Результаты поиска

Содержание VSW7242

Отзывы:

Бренды по названию

Популярные бренды