Vidipac VSW7242, Руководство пользователя

Страница: 161 / 288

5. Feature Configuration - CLI
The Command Line Interface (CLI) is the user interface to the switch’s embedded software
system. You can view the system information, show the status, configure the switch and
receive a response back from the system by keying in a command.
After login the switch through console CLI, you can see the ">" mark. You can type the
command after it. There are some useful command, such as:
Type '<group>' to enter command group, e.g. 'port' to the port configuration.
Type '<group> ?' to get list of group commands, e.g. 'port ?'. You can follow the instruction
step by step to finish the command.
Type '<command> ?' to get help on a command, e.g. 'port mode ?'.
Type 'up' to move up one level or '/' to go to root level
Type "logout" in root level to leave the command line interface
Click "Enter" key after finish the command.
Click "Up" key to repeat the previous commands
Commands may be abbreviated, e.g. 'por co' instead of 'port configuration'. For quick
configuration, the abbreviated typo is helpful.
Example: Configure the System Contact to Orwell
You can go to system group or type the full name in root level. Both of the methods can
meet your need.
In system group mode:
System>contact Orwell
In root level:
>sys contact Orwell
Note: This chapter just lists the relevant command lines of the feature settings for your
reference. You can see the detail explanation of the commands and features through the
chapter 4.
5.1 System Configuration
Feature Command Line
System Information
System Group
Enter the System Configuration Group to do further
configuration.
>system
Type 'up' to move up one level or '/' to go to root level
System>
System Contact Syntax:
System Name [<name>]