Installation
50
Vision Model 140/150 Installation/Operation Manual
PRE
L
IMINAR
Y
3.
Select Locked from the Channel Setup menu and press
ENTER
to clear the check box.
Figure 3-19. Unlocking a Channel
Auto Setup
Use the Auto Setup feature of the Vision 140/150 as a convenient starting point for
calibrating the projector DVI input for optimum picture quality.
Auto Setup is an automated process in which the projector quickly optimizes critical display
parameters such as size, position and pixel tracking, based on the type of incoming video
signal. An Auto Setup allows you to quickly get the image “in the ballpark” after which you
can perform further calibration, if necessary.
To perform an Auto Setup, do one of the following:
On the Theater Master Remote Control:
Press
FUNCS
, then
AUTO
followed by
Enter
.
When the Auto Setup completes, press
Enter
again to keep the new settings.
On the Projector Rear Keypad:
Press
AUTO SETUP
followed by
Enter
. When the Auto
Setup completes, press
Enter
again to keep the new settings.
On the VHD Controller Remote Control:
Press
MENU
, then select
Service
from the Main
menu.
Select
Display Device
from the Service Menu. Finally, select
Configure
from the
Display Device menu, then select
Auto Setup
.
What an “Auto Setup” Does:
Auto Setup sets the following parameters to their default
values:
•
White Level (Contrast)
•
Black Level (Brightness)
•
Pre-Calibration (Auto Input Level) (off)
•
Sharpness (Detail) (if video source)
•
Filter
•
Luma Delay
1. Name
16x9
night
2. Number
02
3. Input
2
4. In
Menu
5. Auto
S
ource
6. Locked
7. Previous
Channel
8.
Next Channel
S
ync Type: Digital Encrypted
H-
S
ync: 26.97
kHz
V-
S
ync: 23.98
Hz
Interlace:
No
Channel Edit
Clear this check box to unlock the channel
➤
You cannot use Auto Setup with a locked channel; you must unlock it
first. Refer to
Unlocking Channels
on page 49.
Note
Содержание Vision 140
