Quick Guide for the V-Tap Analog
V1.0 ©2017 Vidicode 3
PC REQUIREMENTS FOR THE CALL RECORDER VOIP SOFTWARE
Windows Vista/7/8/10 , Intel Pentium >2GHz , 4GByte RAM , >100 MB free disk space.
SOFTWARE INSTALLATION
1. Connect the V-Tap Analog to a free USB port on your PC.
Note1: The V-Tap Analog must be connected to the same PC, otherwise the installer will not continue.
Note2: The V-Tap Analog may present itself
in the Device Manager as a “Human Interface Device”.
2. Software installation
Place the CD-ROM in your computer and the software installation starts automatically. In case the
installation does not start
automatically, locate the file ‘CRVoIPInstall.exe’ on the CD and start
it manually.
The following window appears:
•
Select your preferred language for the installation and press OK
•
Now you can proceed with the next steps of the installation and you will be asked to confirm the
locations on your hard drive where to store the software and the data files.
NOTE: A separate installation of the WinPcap driver may be needed and is started automatically,
depending on the absence of this low-level network interface driver.
