Instruc
tion manual - English - EN
3
MNVKVIPNX_1744_EN
6.2 Installing the wiper kit on
NXL, NXM and NXM36 housing
Insert the open metal fastening band through the 2
slots on the wiper body as shown in the drawing.
Fig.
2
Position the wiper body by passing the clip around
the body of the housing.
Tighten the clip with a screwdriver, fastening the
wiper body.
Fig.
3
Assemble the wiper blade on the output shaft,
fastening it in the stand-by position on the left of the
front glass.
Fig.
4
If necessary, use the fixing clip to adjust the position
of the wiper body so it does not interfere with the
housing support. Assembly is flexible based on the
orientation of the housing.
Pay attention to adjust the wiper blade in
the housing NXM36. Blade movement must
not interfere with the screw heads.
Fig.
5
6.3 Installation of the optional
nozzle kit (only for NXL housing)
Unscrew the nut (01) from the fitting, inserting it in
the pipe (02) and insert the end of the pipe in the
spinner (03).
02
01
03
Fig.
6
Lock the nut to the coupling.
Fig.
7
Содержание VIPNX
Страница 2: ......
