Videotec SR4C, Руководство по эксплуатации

Страница: 43 / 98

6.2.3 Input video setup
The following menu is used to change the settings for the input videos.
CAMERA SELECT: selects the camera to be set up, press “ENTER” to change the input
camera.
CAMERA RECORD: enables/disables recording of that input, (during recording the symbol
“O” is displayed at the side of the camera title, if recording of that input is enabled, or “X” if
disabled).
MOTION SENSITIVITY: regulates the sensitivity of the motion sensor associated with the
input, from a minimum of 1 (ignores slow movements or movement of very small objects) to
a maximum of 5.
MOTION AREA SETUP: sets the two areas on the screen where motion is to be detected.
Pressing “Quad” will display the available controls for changing the areas. It is possible to
select from three area sizes for motion detection (by pressing “ENTER”) : spot, medium, full
screen. The two areas are the same size.
The zones that are not covered by the detection area will not trigger an alarm, even if motion
is detected. To shift the detection area, press keys (11), (14) and (17), (18) respectively for
horizontal and vertical shifts. Press “PLAY” to select one area or the other.
BRIGHTNESS: used to select input brightness, from one of 10 levels.
CONTRAST: used to select input contrast, from one of 10 levels.
HUB: used to select input colour intensity, from one of 10 levels.
CAMERA TITLE: can be used to change the input title, which will be displayed instead of the
default title
[CAM1].
Page 15 of 22 MNVC4SRC_0648
CAMERA SETUP
CAMERA SELECT [CAM1]
CAMERA RECORD ON
MOTION SENTSITIVITY 1[MIN]
MOTION AREA SETUP
BRIGHTNESS STANDARD
CONTRAST STANDARD
HUB STANDARD
CAMERA TITLE EDIT
EXIT