Pag. 20
SM42A / SM82A 2802
[READ THIS CAREFULLY 6.1]
[----------------------------]
[ If a new password is ]
[ inserted and forgotten ]
[ this setup procedure ]
[ will be unaccessible ]
[ and the system locked. ]
[ ]
[ ]
[ Procede to change pwd? ]
[ ENTER.Yes ]
[ CLEAR.No ]
5.3.5 Change password submenu
Entering the change setup password submenu will show a warning message
on the screen, shown on the screen to the left. Be very careful because if a
password setting is lost it will be necessary to contact the supplier to reset the
whole system and all the data will be lost.
The instructions for changing the password are shown on the screen.
[VIDEO MASK 7]
[----------------------------]
[ ]
[ Camera no.1 ]
[ ]
[ ]
[ ]
[ ]
[INC/DEC.Camera Change ]
[ENTER.Show/Change ]
[ ]
[SEQ.End ]
5.3.6 Masking
submenu
Masking is a system for hiding part of the image when this comes from fixed
cameras. If part of the image supplied by the camera is to be covered it should
be masked.
Choose the camera to be masked using
8
and
9
. Press
to view the
preset mask and modify it if necessary. A typical screen is shown in the
following example.
[ ********** ]
[ ********** ]
[ ********** ]
[ ********** ]
[ **##****** ]
[ **##****** ]
[ ]
[ CAMERA 1 ]
[ -------- ]
[ 1
< = @
[ Enter
{ y@
[ SEQ. Fine]
5.3.6.1
Submenu for Masking: modify
The example on the left * shows the current mask for camera 1, # indicates the
cursor, which can be shifted using the left
!
,
right
"
,
up,
#
down
$
keys, or by moving the joystick if the matrix is controlled by a DCJ keyboard.
Press
to mask /remove the mask under the cursor.
Pressing the
(
key twice quickly will completely remove the mask on the
video signal.
Press
8
and
9
to select another input video.
confirms the changes made to the masks of the various input videos.
6 Keyboard and Switching functions
The SM42A / SM82A matrix is supplied with a local keyboard that allows full control of all matrix functions.
Monitor key: Used to change the active output video (monitor) controlled by the keyboard.
Keeping the monitor key pressed, press the
!
!
key to control output video n°1
Keeping the monitor key pressed, press the
"
"
key to control output video n°2
Warning: if output video n°2 has been preset under the control of VCR trigger impulse, the keyboard will not
be able to control output n°2 and any manual attempt to switch the input to output 2 will have no effect. If the VCR
trigger function is not used to control output video n°2, set Use VCR: No for the item EXTERNAL TRIGGERS in
the OSM programming menu (for further details see the section on OSM programming of the matrix).
The
6
6
key: used together with the
key, allows the entering in the OSM programming. Keeping the
6
key
pressed down, press the
key. The matrix will enter OSM programming mode. Follow the instructions given in
the menu to configure the matrix.
The
key: used together with the
6
6
key, allows the OSM programming entering. The enter key is also used to
change or confirm values during OSM programming.
Содержание SM42A
Страница 1: ...MANUALE D USO 6 6 0 0 6 6 0 0...
Страница 27: ...OPERATING INSTRUCTIONS 6 6 0 0 6 6 0 0...
